Twinstar Home 73696/18SM9977-PC76 Manual De Instrucciones página 13

Turn nuts counterclockwise to loosen, remove and
set aside. Securely grab logs on left and right side
and lift log/ember bed assembly straight up. Once
ember bed has cleared the support bracket and
threaded rods, bring log/ember bed assembly
forward and out of unit and set aside in a safe
place (Fig. 4).
6. Unhook light bulb spring clips from the bulbs, and
unscrew the bulbs (Fig. 5). After replacing the
bulbs make sure to replace the light bulb spring
clip. Remember to replace all the bulbs at the
same time with clear 120-volt, 40-watt E12 light
bulbs.
7. Follow steps 1 through 4 in reverse order to
reinstall glass and frame into your insert.
WARNING: Do not exceed 40 watts per bulb. Use of higher-rated bulbs may result in
a fi re, causing property damage or personal injury.
Wooden
Ember Nut
Logs/Ember bed
Ember bed Mounting Post
Ember bed Light Bulb
12
Fig. 4
Light Bulb Holding Spring
Fig. 5
Pull
Pull