Twinstar Home 73696/18SM9977-PC76 Manual De Instrucciones página 9

5. Locate Hearth/Base (A) and lie down on scratch free
surface, Insert Wood Dowel (CC) into the
Hearth/Base, push the completed assembly from
the step 4 to the Hearth/Base as show in diagram,
tighten Screw (DD) through the pre-drilled holes.
Hardware Used
CC Wood Dowel
DD
Screw
6. Insert one Wood Dowel (CC) into the pre-drilled
holes on the top edges of the assembly from step
5. Insert Camlock (AA-1) into the predrilled holes
in the underside of the Mantel/Top (G), make sure
to tighten. Insert Camlock (AA-2) into the holes in
the Side Panels. Attach the Mantel/Top (G) fi nished
side up to the completed assembly. Use Phillips
head screwdriver to tighten Camlock (AA-2).
Hardware Used
AA Camlock
CC Wood Dowel
Fig. 5
CC
x 4
x 12
Fig. 6
x 8
x 6
8
DD
G
CC
A
AA