Updating Firmware - Work Pro Digiline Serie Manual De Usuario

Depending on the Digiline devices firmware, could be necessary to update it.
PROCESS
The first step is to check the firmware version of the device:
1. Select the Network tab, the software will show the devices found in the LAN (in this example, Digiline MX)
"i"
2. Push the symbol closed the device name to show its information (MAC, IP address, and firmware version).
Check the last line which shows the firmware version and , closed to it the word "(Not Updated)". On this
conditions, it is necessary to update the device firmware.
"^"
3. Push the symbol in the same line to start the updating process. A
appears. This symbol only appears when the device is not updated

4. Updating Firmware

The device
needs to be
updated
windows requesting confirmation, will
MX
MKII
PAGE 25