Work Pro Digiline Serie Manual De Usuario página 7

2.2. WorkCAD (Common Interface)
WorkCAD Designer is the new software of WORK® for device control through Ethernet. Its intuitive interface allows
managing any device parameters configurable (general visualization of the installation).
WorkCAD incorporates common sections available for all compatible devices. In the next pages, we go to explain
these common sections:
PROJECT
INSPECTOR
2.2.1. DEVICES
WorkCAD works with the virtual and physical device concept. in the first case involves using a device from the
library elements and configure OFFLINE its settings for a later dump to a physical device connected to the network.
Within the DEVICES window there are two tabs:
The Library tab includes a drop-down with all devices compatible with WorkCAD software.
The Network tab lets you locate a physical device connected to the network.
2.2.1.1. Library
You can create presets but, in order to use them, you need to download them into a physical device. Consult
(3.2. PRESETS) section for further information.
OSC
HISTORY
Accessing to the Library tab, it displays a menu
with the WorkCAD software compatible devices.
After selecting the device , double click the "+" sign
next to the name to display its control interface on the
right side of the screen.
Furthermore, the device will appear in the Project
Inspector tab to associate it with a group of devices.
NOTE: As we are working OFFLINE, the LED next to
name in Project Inspector window is off.
MX
MKII
PAGE 06