OPERATION INSTRUCTIONS
1.
The pull chain labeled SPEED has four
positions to control fan speed. One pull is
HIGH, two is MEDIUM, three is LOW and four
turns the fan OFF. (Fig. 1)
2. The pull chain labeled LIGHT is used to turn the
lights ON or OFF. (Fig. 2)
3. Use the fan reverse switch, located on the
switch housing, to optimize your fan for
seasonal performance. (Fig. 3) A ceiling fan
will allow you to raise your thermostat setting
in summer and lower your thermostat setting in
winter without feeling a difference in your
comfort.
Note: Wait for fan to stop before moving the
reverse switch.
1
2
3
15
Switch
Housing