Inserting A 608 Modules; Inserting A 610 Module; Removing Modules - Miele professional A 501 Instrucciones De Manejo

Inserting A 608
modules
Inserting A 610
module
Removing
modules
The A 608 module can be connected to the water couplings on the
first and second levels of the mobile unit, on the right-hand side in
the A 504 mobile unit.
Holding the module at an angle, slide it up to the water coupling on

the mobile unit level.
Plug the module connector firmly into the water coupling of the

mobile unit.
Then place the module retainers on the strut on the left-hand side

of the mobile unit.
The A 610 module can only be used in conjunction with the Power-
PulseCleaning option on the machine.
The module connection for internal cleaning and supplying medical
compressed air is established via a connector on the left-hand side of
the wash chamber ceiling. The funnel which holds the connector
must be opposite the water supply to the mobile unit.
Place the module on the two struts in the upper level of the mobile

unit.
The module sits horizontally on the two struts of the mobile unit.
To remove modules from the mobile unit, follow the steps in the

"Inserting modules" section in reverse order.
en - Areas of application
35