Würth 0715 54 055 Instrucciones De Uso página 4

! For your safety
Safe working with the unit is only possible if you
read the operating and safety instructions fully,
and strictly follow the directions that they con-
tain.
• Before working on pressurised parts of the tyre filler,
disconnect it from the compressed air line
• Do not open the casing, as this would render void the
operating permit in accordance with the calibration
law.
• Before each use, check that the unit is fully functional.
If functional capability (e.g. battery display) is not
guaranteed or if damage is found (e.g. cracks), the
unit may not be used or made ready.
• Use only original Würth spare parts.
• Do not make any type-related modifications to the
unit.
Unit characteristic values
Digital tyre filler
Art. No.
Medium
Measuring range
Smallest display unit
Max. perm.
operating pressure
Temperature range
Display accuracy
Connection thread
Type
IP protection class
Battery life
Batteries
Correct use
The tyre filer is intended only for checking, filling and
deflating tyres. The unit may only be operated on a com-
pressed air mains with a maximum of 15 bar operating
pressure. Any other use or use beyond the specified limit
is incorrect.
The user shall be liable for any damage arising from
incorrect use.
0715 54 055
Air and nitrogen
0–12 bar
0.05 bar
15 bar
–10 °C – +50 °C
< 0.08 bar from 0–4 bar
< 0.16 bar from 4–10bar
< 0,25 bar > 10 bar
1/4"
calibrated
54
approx. 2 years
with 2 h of measurement daily
(Art. No. 0827 01)
2 x 1.5 V Micro AAA
Putting into operation
• The connection is made via a compressed air hose
(nominal diameter min. 6 mm) with a quick-release
coupling.
• Operate the unit only with clean, condensation-free
compressed air or nitrogen.
• Insert the batteries into the non-pressurised unit as
described in the "Battery change" section.
Unit elements
Filling hose
Hose connection
Digital display
Connection nipple
Operating lever
Rubber guard
Suspension eye
Valve adapter
Testing routine
• For safe handling, the tyre filler has an automatic
testing routine. When the tyre filler is connected to
the tyre valve, all the display segments appear for
1 second as a check for the user. If a segment fails,
the unit must be sent to Würth Customer Service
immediately.