Button Functions - Fisherbrand 15345103 Manual De Instrucciones

Button Functions

Two switches provide the necessary functions to access a given menu,
select a function and to turn it on or off. Functions are listed as follows:
ON/ZERO Off Button
Primary Function (ON/ZERO)- Turns on balance. If balance is on,
zeros the display.
Secondary Function (Off)- Turns balance off, OFF will be displayed
after button is held for 3 seconds. In Display Hold or Totalize mode, a
long press exits the mode without turning the balance off.
Menu Function- An extended long press (>5 seconds) during power up
will cause the balance to enter the Menu mode. A short press is used to
accept a setting on a display.
PRINT Unit Button
Primary Function (PRINT)- Sends print command to interface port. If
Display Hold or Totalize mode is active, a short press will enter that mode.
Secondary Function (Unit)- Press and hold scrolls through units.
Release on desired unit.
Menu Function- Will bypass setting shown on display.
10
2014_391_10889_4_SPU_Portable_Series.indb 10
www.eu.fishersci.com/fisherbrand
23/01/2015 11:37:30