CESVA FP122 Manual Del Usuario página 58

The AP602 has been especially designed to generate the signal reproduced by
the BP012 and can also be used with other speakers. To do so, simply connect
the speaker to the SPEAKER OUTPUT [24]. For technical characteristics of this
output see 7.1.
NOTE:

Always connect the equipment with the equipment turned off and consult
the chapter 8 about safety measures and advice.

Make sure the speaker characteristics are suitable to work with the AP602.

is not responsible for damage caused to speakers, other than
BP012, connected to the AP602.
56
Chapter 4 Configuration and use of FP122