Adjusting The Footplate; Adjusting The Knee Angle; Adjusting The Footplate Angle; Folding Up The Footplate - Ottobock MPS Instrucciones De Uso

6.8 Adjusting the footplate
CAUTION
Incorrect entry over the footplate that is folded down
Falling, tipping over of the user due to user error
X Fold up the footplate before getting in�
CAUTION
Improper lifting by attendants
Tipping over, falling of the user due to lifting on removable components
X Attendants may lift the product only by welded or permanently attached components� It is particularly danger-
ous to lift the buggy by the footplate, push handle/push bar, lap bar or armrests�
6.9 Adjusting the knee angle
The knee angle of the footplate can be adjusted within a range of 0° to +90° as needed:
1� Open the adjustment lever (see Fig� 24)�
2� Adjust the knee angle�
3� Retighten the adjustment lever�
4� Prior to use, check the secure position of the footplate� To do so, press the footplate down�
Æ The knee angle must not change�
6.10 Adjusting the footplate angle
1� Loosen the screws (see Fig� 25) and set the desired angle�
2� Retighten the screws�
6.11 Folding up the footplate
The footplate can be folded up for transport�
1� Pull the release strap (see Fig� 26) and flip up the footplate�
MPS
24
25
Settings and use
26
Ottobock | 15