Diopter And Parallax Adjustment; Sighting In The Rifle Scope - KAHLES K4i Manual De Instrucciones

5 DIOPTER AND PARALLAX ADJUSTMENT

• Turn the diopter compensation ring (1) until you get a
sharp reticle image
• Turn the parallax adjustment wheel (3) until you achieve
a sharp image and the reticle does not move on the
target due to head placement.
• Magnification ring (2) turn to increase or decrease
magnification

6 SIGHTING IN THE RIFLE SCOPE

After the rifle scope has been properly mounted and bore
sighted by a professional gunsmith you will need to sight in
your rifle and rifle scope. Attention – the screws of mounts
shall in no case be tightened stronger than max.
240 Ncm / 21 in lbs!
Sight in the rifle scope (on the shooting range) to your
specific distance and desired point of impact by turning the
elevation and windage adjustments to move the bullet
impact to your desired point of impact. The direction of
bullet impact is engraved on each adjustment.
Once you have established the preferred point of impact
on the target you will need to zero the elevation and
E
windage adjustments. An arrow with "Up" at the elevation
turret and an arrow with "R" on the side adjustment turret
mark the direction of rotation for a meeting point shift up
("Up") or rightwards ("R").
Expert mounting is required to ensure optimum perfor-
mance.
22
symbolic picture
2
3
1