D r i n k c o o l e r s
MAINTENANCE (cont.)
15º.-Complete the cleaning operation by
emptying the drip tray (1) (see Fig.16), To
remove, pulls the tray gently up (A) and
towards you (B). Take out the perforated drip
rack (2) as shown by the arrow (C). Pour off
the contents of the drip tray (1) and put the
rack (2) back (D). Bring the tray (E) up to the
front panel and slot it in place (F) over the
screws (3).
16º.-When you have finished, put all the parts
back again. Once the tank (D) seal (J) is back
in place, moisten it on the outside so that it
slides more easily (Fig.17).
Please note: The inside of the seal in contact
with the tank must be perfectly dry, otherwise
you will not be able fit the tank into its
housing.
- 16_EN-
U s e r ' s i n s t r u c t i o n s a n d m a i n t e n a n c e m a n u a l
Figure 16
Figure 17
SL310008810 Ed.00 - 11-2012