Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
www.multilaser.com.br
configure the corresponding function.
4.6.1. Wireless Settings
Choose menu "Wireless > Wireless Settings", you can configure the basic settings for the wireless network on this page.
•
SSID - Enter a value of up to 32 characters. The same name of SSID (Service Set Identification) must be assigned to all
wireless devices in your network. Considering your wireless network security, the default SSID is set to be MULTILASER_
XXXXXX (XXXXXX indicates the last unique six numbers of each Router's MAC address). This value is case-sensitive. For
example, TEST is NOT the same as test.
•
Region - Select your region from the pull-down list. This field specifies the region where the wireless function of the
Router can be used. It may be illegal to use the wireless function of the Router in a region other than one of those specified
in this field. If your country or region is not listed, please contact your local government agency for assistance.
When you select your local region from the pull-down list, click the Save button, then the Note Dialog appears. Click OK.
Note:
Figure 4-16 Wireless Settings
145
Publicidad
Tabla de contenido
