Saw Unit; Mount The Saw Onto The Rail - Husqvarna WS220 Manual De Instrucciones

Ocultar thumbs Ver también para WS220:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Saw unit

1
Locking handle
2
Lock button The button on the lock handle must be
pressed down in order to free the safety catch in order
to open the lock handles.
3
Guide wheels Tightened against the rail using the lock
handles.
4
Controlling.
5
Cutting arm The cutting depth is controlled by rotating
the arm with the remote control.
6
Attachment for blade guard.
7
Guide flange for blade guard May be rotated to
transport position.
8
Feed impeller Runs the saw along the rail.
9
Handle
10 Guide groove for blade guard
11 Outward water connection. Connected to the blade's
water connection.
12 Electrical connection and control connection
13 Water cooling input
ASSEMBLING AND ADJUSTMENTS
19
14 Outer blade flange
15 Blade bolt
16 Inner blade flange. When cutting flush, the blade is
screwed securely into the inner blade flange.
17 Screw threads for flush cutting, 6 pcs.
18 Plugs for threads, 6 pcs.
19 Water connection for blade.

Mount the saw onto the rail.

Push down the lock buttons on the lock handles and
turn the handles out from the sawing unit to free the
guide wheels from the sawing bracket on the transport
trolley.
Lift the sawing unit onto the rail with the lock handles
opened, and angle the sawing unit over the rail so that
the feeding wheel locks into the rack on the rail.
Then lock the sawing unit to the rail by turning the lock
handles back in towards the sawing unit until the lock
buttons on the handles pop up and the guide wheels
are flush against the rail.
If the sawing unit is mounted on a vertically mounted rail,
one should begin by locking the upper lock handle, since
when it is locked the saw's weight is relieved and it is
easier to lock the lower handle. Make sure at the saw has
no play between the guide wheels and the rail, if there is
play the guide wheels must be adjusted. See the section
'Adjustment of guide wheels'..
WARNING! To cut without the saw
!
securely assembled on the rail is
associated with lethal injury.
English
15

Publicidad

Tabla de contenido
loading

Tabla de contenido