Chicco Polly 2in1 Instrucciones De Uso página 24

RECLINING BACKREST ADJUSTMENT
The backrest of the Highchair can be adjusted to 3 positions.
20. To adjust the inclination of the backrest, press the button lo-
cated at the rear top, recline the backrest until the desired position
is reached and release the button, the backrest will lock automati-
cally and an audible click is heard, signalling that it is locked into
position (diagram 19). The operation can be carried out also with
the child sitting in the Highchair, although it can be more difficult.
LEG REST
The leg rest of the Highchair can be adjusted to 3 positions.
21. Press the two side adjustment buttons and recline the leg rest,
until the desired position is reached (diagram 20).
FOOTREST
The footrest of the Highchair can be adjusted to 3 height posi-
tions.
22. From the use position, turn the footrest until it is parallel to the
leg rest, and unlock it (diagram 21).
23. Remove the footrest and fit it at the desired height (diagram
22).
24. Turn the footrest until the new desired use position is obtained,
and lock it into position (diagram 23).
WHEELS AND LOCK SYSTEM (if installed)
WARNING: Always place the Highchair on a horizontal, stable sur-
face. Never place the Highchair near stairs or steps.
NOTE: for some markets, the number and type of wheels may dif-
fer from those shown in this instructions booklet.t.
CLOSING THE HIGHCHAIR
WARNING: When opening the highchair, ensure that your child,
or other children, are at a safe distance. Ensure that during these
operations the movable parts of the highchair do not come into
contact with your child.
WARNING: if it is fitted, remove the activity tray before closing the
high chair, and store it away at the rear of the frame using the two
designated fixtures.
25. Put the backrest in a vertical position and the leg rest in a hori-
zontal position (diagram 24).
26. Raise the armrest in a vertical direction by pressing the buttons
located on the lower part of the arm rests, until an audible click is
heard (diagram 25).
27. Fold the side fabric cover flaps inside (diagram 26A) and lift the
leg rest and seat in a vertical position (diagram 26B), a fastening
system maintains the frame compact and closed.
28. Lower the seat by pressing the two side buttons at the same
time, as shown in the diagram (diagram 27).
29. Press the buttons at the centre of the joints and, at the same
time, close the legs of the Highchair using your foot (diag. 28 A),
until an audible click signals that the Highchair is locked in the
closed position. WARNING: Check that the frame is closed and the
wheels are positioned in a way that the frame can stand upright on
its own (diagram 28B).
Accessory: HYGIENIC SEAT COVER (optional, not included
in the price)
The hygienic seat cover can only be used over the normal highchair
fabric cover.
WARNING: Never use the hygienic seat cover without the high-
chair fabric cover.
Polly Double Phase Version: It has two hygienic covers: one to be
fitted to the Highchair if the double padding is used, the other to be
used with the single padding.
To fit / remove the hygienic seat cover from the highchair; follow
the same instructions given for the highchair fabric cover (Polly
version: 7A-7C, Polly Double Phase version: 7D-7F). With the Polly
Double Phase version, the same operations carried out with the up-
per hygienic cover must be carried out also with the lower cover.
24