Front Panel - Pioneer SX-S30DAB Manual De Instrucciones

> Before Start > Part Names

Front Panel

Part Names

1. Í STANDBY/ON button: Turns the unit on or into standby mode.
2. DIRECT button: This switches the unit to the "Direct" mode (
processing that affects sound quality, so sound closer to the original is reproduced. Press
again to cancel.
DIRECT indicator: This lights when the listening mode is "Direct" or "Pure Direct". The
display section and other indicators are turned off at this time.
3. Display ( P6)
4. Remote control sensor
5. NETWORK indicator: When the power of the unit is on, this lights when "NET" is selected
with the input selector and the unit is connected to the network. If the unit is in standby
mode, this lights when functions such as HDMI CEC and Network Standby are enabled.
6. INPUT SELECTOR dial: Switches the input to be played. (BD/DVD / CBL/SAT / GAME /
STRM BOX / CD / TV / PHONO / DAB / FM / NET / USB / BT AUDIO)
7. MASTER VOLUME dial: Allows you to adjust the volume.
8. PHONES jack: Stereo headphones with a mini plug (
9. BASS dial: Adjusts the bass.
10.TREBLE dial: Adjusts the treble.
11. FL OFF indicator: This lights when you have pressed DIMMER repeatedly to turn the
display off.
12.USB port: A USB storage device is connected so that music files stored in it can be
> Install > Initial Setup

  
P27) which shuts down
3.5 mm) are connected.
Ø
> Playback
  
 
played. You can also supply power (maximum 5 V/1 A) to USB devices with a USB cable.
Advanced Setup | Firmware Update | Others
 
E
N
3