Pellet Stove Usage And Advantages; Pellet Stove Technical Description - Viadrus AGURO Manual Del Usuario

GB
GB
Dear customer,
We thank you that you have bought a AGURO pellet stove, thus having shown your confidence in VIADRUS brand. Your new stove was
manufactured in a company that is a holder of ISO 9001:2000 certification.
Before installation and commissioning, please carefully acquaintance with the instruction manual for your new pellet stove. It will help you to
avoid possible problems incurred as a result of violation of guidance and instructions specified in this manual, which can – under certain
circumstances – lead to a damage of the stove. Save this manual for searching other information in the future.
1

Pellet stove usage and advantages

The automatic AGURO pellet stove is also determined for permanent heating of dwelling and commercial premises.
Fuel is conveyed by means of an auger from the fuel reservoir into the burner bowl, whereas the fuel quantity is automatically corrected in
dependence on a required heating power. In case of the full fuel reservoir, depending on the required temperature in the room, the stove can be
operated during about 30 hours.
The stove is controlled with help of a control unit, which is integrated in the fuel reservoir cover. A user can choose one of the working modes:
"Heating" or "Auto" with the week programming.
The control unit regulates the kindling phase, the heating phase and cooling phase, and ensures by this safety operation of the pellet stove. The
display displays a working mode, in which the stove is occurred at the moment. Eventual error messages are displayed on the display in a text
form with specification of date and time.
2

Pellet stove technical description

It is a stove assembled from high quality steel plates. The stove furnace is equipped with a cast-iron burner bowl. The pellet stove doors are
equipped with a heat-resistant glass, and their structure allows opening in the horizontal direction to the left. A part of the pellet stove is a
removable ash-pan. The pellet stove surface is protected by heat-resistant painting with the resistance up to 650°C (heating chamber) and
350°C (other steel-plate parts – a side wall, a rear cover, a stove cover, etc.).
Tab. №. 1 Main thermo-technical parameters of the pellet stove
Total high
Width
Depth
Dead weight
Neck - chimney
Neck – air supply
Fuel reservoir volume
Min. chimney operation draught
Dwelling premise heat ability (in dependence on a degree of facility insulation)
Effectiveness
Nominal heating power
Heating power range
Electric power supply
Fuel consumption of electric energy
Electric fuse
~
Fuel consumption at min max heating power
Average combustion products temperature behind the neck
Combustion products' mass flow rate
Content of CO at 13% O
2
Connection to the electric power supply network:
The stove is supplied from the electric power supply network with help of a cable with the length of about 1,5 m with an Euro terminal, which is a
part of the package of the stove. The cable is to be connected to the electric socket of 230 V/50 Hz. The average consumption of electric energy
during operation is about 25 W, and the average consumption of electric energy during the kindling process is 135 W. The supply cable has to
be laid so that it is not in contact with sharp edges or corners and is not in contact with hot surfaces of the stove.
Fig. №. 1 Main dimensions
mm
mm
mm
kg
mm
mm
kg
Pa
3
m
%
kW
kW
V/Hz
W
A
kg/h
°C
g/s
%
80
1101
931
396,
209
80
50
35 kg
10-15
50 - 220
87,3
6,4
2,6 – 6,5
230/50
appr. 25
2,5
~
0,7 1,6
143
6,5
0,018