Manipulation With The Control Electronics; User Menu - Viadrus AGURO Manual Del Usuario

GB
GB
6

Manipulation with the control electronics

You may perform the following functions in the user menu:
•
set calibration of the pellet auger,
•
monitor temperature,
•
choose one of four predefined powers,
•
set the timer for the pellet stove switching-on and switching-off.
Fig. №. 6
6.1

User menu

TO ACTIVATE THE „SLEEPING" DISPLAY, TOUCH THE SCREEN WITH THE CONTROL BUTTONS
BASIC DISPLAY SCREEN
MENU 1 – INFORMATION
Press the button to display basic information of operation of the pellet stove:
•
actual flue gases temperature in °C
•
adjusted temperature on the room thermostat in °C
•
induced air flow-rate (provided the stove is equipped with a sensor for this measurement)
•
exhaust fan rotation speed
•
number of the stove working hours
•
number of the kindling cycles
•
product code
Screen 1
Information
Exhaust T [°C] 23
Room T [°C] 22
Air Flux 0
Fan Speed [rpm] 0
Work Time [h] 138
MENU 2 – MENU CUSTOMIZATION -
Press the button – to display the screen for changing of user parameters.
Screen 1
Menu Customization
Combustion Manag <<
Heating Management
Remote Control
Chrono
Manual Load
Navigation in menu „UP", increase the value
Navigation in menu „DOWN", decrease the value
Button in menu „EXIT"
Button in menu „CONFIRM"
Button in menu „ON/OFF"
Indication lamp „WARNING"
Screen 2
Information
Ignition [nr] 23
Prod. Code 494-6000
Screen 2
Menu Customization
Cleaning Reset <<
86