SCHOTT TITRONIC 110 plus Manual De Instrucciones página 46

42
In the course of the filling or rinsing process, the display of the colon indicates that these functions are be-
ing performed. Upon completion of the filling process, the display will show <<0.000 ml>> or <<0.00 ml>>.
During the rinsing process, the volume indicator will show the volume count for supervision purposes. The
display shows <<r n 1>>.
After two cycles, rinsing is finished, and the display will show <<0.000 ml>> or <<0.00 ml>>.
4.8 System settings of the TITRONIC
After pressing a the <Rinse> key, the selected number of rinsing cycles will be displayed. Using the nu-
meric keys, 1 to 3 cycles can be input.
Fig. 12 Display if 2 rinsing cycles were specified
4.9 System settings of the TITRONIC
After pressing the <Fill Speed> key, the set fill speed will be displayed. An input can be made using the
numeric keys. Input of the time: <numeric keys> and <ENTER>. The filling time has to be modified it the
liquid to be dosed has a high viscosity or a high and vapour pressure. Filling time between the 20 s per
100% of volume and 300 s per 100% of volume are possible, as a rule, a reduction down to 300 s per
100 % of volume will be sufficient.
Figure 13 Display for filling speed = 20 s
4.10 System settings of the TITRONIC
After pressing in the <DOS SPEED>/F9 key, the set dosing speed will be displayed in terms of ml/min.
Using the numeric keys, an input from 0.01 to 100 is possible. When entering the dosing speed, the max.
possible speed is limited by double the cylinder volume of the interchangeable unit used per minute, for
instance, 100 ml/min for a TA 50 interchangeable unit with a volume of 50 ml.
The smallest admissible speed is 0.01 ml/min. Please acknowledge your input using the <ENTER>key.
Fig. 14 Display of dosing speed = 100 ml/min.
This indication is only valid for a 50 ml TA; in this case the theoretical dosing speed of 100 ml/min is
reached.
Working with the TITRONIC
®
110 plus Piston Burette
®
110 plus Piston Burette: Rinsing
®
110 plus Piston Burette: Filling speed
®
110 plus Piston Burette: Dosing speed