Adjusting The Volume; Channel Search - Gira 0315 Serie Instrucciones De Montaje Y Funcionamiento

Adjusting the volume

The volume can be adjusted with the (-)
and (+) buttons.
Press the right-hand (+) button to increase
the volume.
Press the left-hand (-) button to decrease
the volume.
i
When you switch your radio on, the chan-
nel previously chosen (memory 1/2 or
GB
channel manually set by channel search
function) and the volume previously cho-
sen will be selected.

Channel search

The channel search function is activated by
pressing the channel search button
once. When searching, the LED
blink and the sound is switched off.
When a channel is found, the LED indicator
switches off and the sound switches on.
i
The channel search function starts from
the lowest frequency and stops at the
highest frequency. As soon as the high-
est frequency is reached (108.00 MHz),
the radio returns to its lowest frequency
(87.50 MHz) and the search procedure
recommences. The radio automatically
switches to a higher level of reception
during this procedure. This also allows
weaker channels to be found.
20
Settings when switching on
Channel search function
will