Cleaning And Storage - NUK Baby Thermometer 2 in 1 Manual De Instrucciones

The battery must be replaced as soon as the following
symbol appears in the LCD display:
18
In this case, proceed as follows:
Take a small, thin object (e.g. a paper clip) and press it into
1
the unlocking opening of the battery compartment lid while, at
the same time, pushing this opening outwards with both
thumbs.
Firmly holding the device, carefully lift out the battery using a
2
small, thin object (e.g. a paper clip).
Insert the new CR2032 battery with the positive terminal
3
facing upwards and the minus terminal facing downwards by
sliding the battery underneath the metal hook and pressing
down until it clicks into place.
If incorrectly fitted, the battery compartment and even the
Note
device may become damaged.
Push the battery compartment lid back onto the device until
4
it audibly clicks into place.
3.2

CLEANING AND STORAGE

The probe head is the most sensitive part of the NUK Baby Thermometer 2-in-1. Treat this
part of the device with particular care when cleaning the sensor lens.
Do not submerge the device in water or expose it to direct moisture.
19
- 41 -
Figure
9
Figure
10
Figure
11