IKRA EGN 2500 Manual De Instrucciones página 17

10. Repair Service
Attention! Electrical repairs may only be carried
out by a skilled electrician or a customer service
workshop!
If you send the machine to us for repair, please describe
the fault.
11. Waste disposal and environmental protec-
tion
If your device should become useless somewhere in the
future or you do not need it any longer, do not dispose of
the device together with your domestic refuse, but dis-
pose of it in an environmentally friendly manner. Please
dispose of the device itself at an according collecting/
recycling point. By doing so, plastic and metal parts can
be separated and recycled. Information concerning the
disposal of materials and devices are available from your
local administration.
12. Technical Data
Model
Nominal voltage
Nominal frequency
Nominal power
No-load speed
Max.branch diameter
Collecting container
Weight
Sound pressure level
Sound power level LWA
Service life S6 40% (full load: 4 min., no-load: 6 min.)
Class of protection II; Degree of protection IP24
Technical and visual changes can be made during the
course of the further development and without prior no-
tice. All information given in these instructions for use are
therefore given without guarantee. Legal claims, which
are based on the instructions for use can therefore not
be made.
13. Warranty
For this tool, the company provides the end user - inde-
pendently from the retailer's obligations resulting from
the purchasing contract - with the following warranties:
The warranty period is 24 months beginning from the
hand-over of the device which has to be proved by the
original purchasing document. For commercial use and
use for rent, the warranty period is reduced to 12 months.
Wearing parts and defects caused by the use of no fitting
accessories, repair with parts that are not original parts
of the manufacturer, use of force, strokes and breaking
as well as mischievous overloading of the motor are
excluded from this warranty. Warranty replacement does
only include defective parts, not complete devices. War-
ranty repair shall exclusively be carried out by authorized
GB | Operating Instructions
EGN 2500
V~ 230-240
HZ 50
W 2500
rpm 4050
mm 40
Liter 50
kg 14,1
dB(A) 95,7 (K=3,0)
(EN 13683/A2:2011)
dB(A) 111
(EN 13683/A2:2011)
service partners or by the company's customer service.
In the case of any intervention of not authorized person-
nel, the warranty will be held void.
All postage or delivery costs as well as any other subse-
quent expenses will be borne by the customer.
14. EC Declaration of Conformity
We, ikra GmbH, Schlesier Straße 36, D-64839 Mün-
ster, declare under our sole responsibility that the
product Electric Silent Shredder EGN 2500, to which
this declaration relates correspond to the relevant basic
safety and health requirements of Directives 2006/42/EC
(Machinery Directive), 2004/108/EC (EMC-Guideline),
2011/65/EU (RoHS-Guideline) and 2000/14/EC (noise
directive) incl. modifications. For the relevant implemen-
tation of the safety and health requirements mentioned
in the Directives, the following standards and/or technical
specification(s) have been respected:
EN 60335-1:2012; EN 13683/A1:2009+A2:2011;
EN 62233:2008;
EN 55014-1/A1:2009/A2:2011; EN 55014-2/A2:2008;
EN 61000-3-2:2006/A2:2009; EN 61000-3-11:2000
measured acoustic capacity level
guaranteed acoustic capacity level
Conformity assessment method to annexe V / Directive
2000/14/EC
The year of manufacture is printed on the nameplate and can be ad-
ditionally retrieved via the consecutive serial number.
Münster, 22.08.2014
Gerhard Knorr, Technical Management Ikra GmbH
Maintenance of technical documentation:
Gerhard Knorr, Kärcherstraße 57, DE-64839 Münster
GB-7
108 dB (A)
111 dB (A)