Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
TECHNICAL DATA
Parameter description
Parameter value
Product name
Electric Mosquito
fly swatter
Model
CON.MS-10B
Battery
2x AA
Generated voltage [V]
2300
Dimensions [mm]
520 x 210 x 35
Weight [kg]
0,25
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed
and manufactured in accordance with strict technical
guidelines,
using
state-of-the-art
technologies
components. Additionally, it is produced in compliance
with the most stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
a trouble-free operation, use it in accordance with this user
manual and regularly perform the maintenance tasks. The
technical data and specifications in this user manual are up to
date. The manufacturer reserves the right to make changes
associated with quality improvement. Taking into account
technological progress and noise reduction opportunities,
the device was designed to reduce noise emission risks to
the minimum.
Legend
The product satisfies the relevant safety
standards.
Read the instructions before use.
The product must be recycled.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation (general
warning sign).
Electric shock warning.
Do not touch.
Only use inside.
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details it may
differ from the actual machine.
The original operation manual is in German. Other
language versions are translations from German.
2. Usage safety
Electrical equipment:
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in an electric shock, fire and/
or serious injury or even death.
6
U S E R M A N U A L
Whenever „device" or „product" are used in the warnings
and instructions, it shall mean Electric Mosquito fly swatter.
Do not use in very humid environments or in the direct
vicinity of water tanks. Prevent the device from getting wet.
Risk of electric shock! When in use, do not put your hands
or other items inside the device!
3.1 Safety at the workplace
a)
Make sure the workplace is orderly and well lit.
A messy or poorly lit workplace may lead to accidents.
Try to anticipate what may happen, observe what is
going on and use common sense when working with
the device.
b)
Do not use the device in an explosion hazard zone,
for example in the presence of flammable liquids,
gasses or dust. The device generates sparks which
may ignite dust or fumes.
c)
Upon discovering damage or irregular operation,
immediately switch the device off and report it to
and
a supervisor without delay.
d)
If there are any doubts as to the correct operation
of the device, contact the manufacturer's support
service.
e)
Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
f)
All packaging materials (plastic bags, cardboard,
polystyrene, etc.) must be kept out of reach of
children as they are a potential source of danger
and must be disposed of in accordance with the
regulations in force at the place of use of the device.
g)
The device should be used only in closed rooms and
protected from weather conditions.
h)
Pouring water over the device can cause electric
shock. It is not allowed to use the device in
a bathroom or in places where it is possible to get
the device wet.
i)
The device is not suitable for use in barns, stables, etc.
j)
Never expose the device to rain, remember to
leave it outside and do not expose it to a very dirty
environment.
k)
Do not reach for a product that has fallen into water
or other liquid. In this case, it should be picked up
using a non-conducting material.
l)
Do not use the device near furniture, curtains or
other flammable materials.
REMEMBER! When using the device, protect children
and other bystanders.
3.2 Personal safety
a)
Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b)
When working with the device, use common sense
and stay alert. Temporary loss of concentration whilst
using the device may lead to serious injuries.
c)
Do not overestimate your abilities. When using the
device keep your balance and remain stable at all
times. This will ensure better control over the device
in unexpected situations.
d)
Do not touch the device with wet hands or other
parts of the body.
3.3 Safe device use
a)
Do not overload the device. Use appropriate tools
for the given task. A correctly selected device will
perform the task for which it was designed better
and in a safer manner.
b)
Do not use the device if the ON/OFF switch does not
function properly (does not switch the device on and
off). Devices which cannot be switched on and off
using the ON/OFF switch are hazardous, should not
be operated and have to be repaired.
c)
When not in use, store in a safe place, away from
children and people not familiar with the device, who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
d)
Maintain the device in a good technical state. Before
each use check for general damage and especially
check for cracked parts or elements and for any other
conditions which may impact the safe operation of
the device. If damage is discovered, hand over the
device for repair before use.
e)
Keep the device out of the reach of children.
f)
Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
g)
To ensure the operational integrity of the device, do
not remove factory fitted guards and do not loosen
any screws.
h)
Do not use the device if it has fallen onto the floor
and signs of damage are visible.
i)
Do not use the device if it is wet or damp.
j)
Do not charge batteries that are not suitable for
recharging.
k)
Do not mix different types of batteries, as well as the
old ones with used ones.
l)
Batteries must be mounted according to the
direction of polarization indicated on the device and
battery symbols.
m)
Worn batteries must be removed from the device
and disposed of in a safe manner compliant with the
law provisions.
n)
It is not allowed to short circuit the power supply
terminals.
o)
Do not cover the device in the course of operation as
this may cause danger of overheating.
p)
Do not insert any objects into the openings of the
device.
q)
It is not allowed to touch the grid with metal objects,
even if the main switch is set to the OFF position,
there is a risk of a slight but unpleasant electric shock
and the generator may be damaged.
r)
It is not allowed to use the device to crush insects.
s)
It is not allowed to expose the device to strong
shocks.
t)
For safety reasons it is necessary to remove the
batteries when the device is not used.
4.
Use guidelines
Insecticidal (electric) swatter is designed for exterminating
flying insects such as flies, mosquitoes, bugs etc.
It is not allowed to use the device for games, fun and sports.
The user is liable for any damage resulting from non-
intended use of the device!
EN
4.1 Device description
1
2
3
4
5
6
1.
Grid under voltage
2.
LED lamp
3.
Indicator of the activated electric shock
4.
Active electric shock switch
5.
Main switch
6.
Battery compartment
4.2 Preparing for use
The device should be used only in closed rooms and
protected from weather conditions. The insecticide swatter
is powered by two AA 1.5V batteries.
In order to mount the batteries in the device it is necessary
to:
a)
remove the battery cover from the back of the
handle,
b)
insert the batteries according to the direction of
polarization indicated on the symbols of the device
and battery.
c)
mount the battery cover
The insecticide swatter consists of 3 layers of the metallic
grid and one generator that produces low power and high
voltage electrical discharges, strong enough to eliminate
annoying insects.
4.3 Device use
WARNING! Do not touch the metal grid with your hands or
other parts of your body, even if the device is turned off,
there is a risk of an unpleasant but harmless electric shock.
The insecticide swatter consists of 3 layers of a metallic
grid and one generator that produce low power and high
voltage electrical discharges, strong enough to eliminate
annoying insects.
Activation of the device:
The main switch can be in 3 positions:
•
OFF – the device switched off.
•
Central position – device switched on, the possibility
of using the button of the "active electric shock
switch".
•
ON – the device switched on, possibility of using the
button of the "active electric shock switch". LED lamp
on.
Insect elimination:
a)
Switch on the device by moving the main switch to
the middle position or the position marked as ON.
7
Publicidad
Tabla de contenido
