Ecoflam MAIOR P 300.1 AB Manual Del Usuario página 15

TECHNICAL DATA
General
Mounting
Connection threads
Inlet and return
Nozzle outlet
Pressure gauge port
Vacuum gauge port
Valve function
Strainer
Shaft
By-pass plug
Weight
Hydraulic data
Nozzle pressure range
Delivery pressure setting 12 bars
Operating viscosity
Oil temperature
Inlet pressure
Return pressure
Suction height
Rated speed
Torque (@ 45 rpm)
Note : All TA models are delivered for two-pipe system (by-pass plug fitted in vacuum gauge port). For one-pipe
system, the by-pass plug must be removed and the return port sealed by steel plug and washer.
IDENTIFICATION
(Not all model combinations are available
Consult your Suntec representative)
TA 2
Pressure range :
30 : 7 - 30 bars
40 : 7 - 40 bars
Preheater
facility
Revision number
Flange mounting according to EN 225.
Model 1000 Models 1001/1002
Conical Cylindrical (according to ISO 228/1)
1/4"NPTF G 1/2
1/8"NPTF G 1/4
1/8"NPSF G 1/8
1/4"NPTF G 1/2
Pressure regulating and cut-off (except for 1002 models).
Open area : 45 cm ²
Opening size : 170 μm
Ø 11mm according to EN 225.
Inserted in return port for 2 pipe system;
to be removed with a 3/16" Allen key for 1 pipe system.
4 kg
C : 10 - 21 bars
E : 10 - 30 bars
2 - 75 mm²/s (cSt)
0 - 90°C in the pump.
1,5 bars max.
1,5 bars max.
0,45 bars max. vacuum to prevent air separation from oil.
3600 rpm max.
0,30 N.m
PUMP SUNTEC TA TECHNICAL DATA
PUMP
TA : type
Gear set capacity
(see pump capacity curves)
Shaft rotation
(seen from shaft end)
A : clockwise rotation
C : anti clockwise rotation
A 40 10 5
420010362200 Maior P 300.1/400.1 AB
Pump capacity
Capacity (L/h)
400
J 7
300
J 6
200
J 4
100
0
5 10
Viscosity = 5 cSt - rated speed = 2850 rpm
Data shown take into account a wear margin.
Do not oversize the pump when selecting the
gear capacity.
Olio in aspirazione
Attacco
Olio in pressione
vuotometro o
misura presione
di entrata
Ritorno dell'olio
non utilizzato
al serbatoio o
all'aspirazione
Aspirazione
Grano
di by-pass
inserito
Vite di regolazione
della pressione
Aspirazione
Grano
di by-pass
tolto
INSTALLAZIONE
MONOTUBO
15
15 20 25 30 35
Pressure (bars)
Attacco
manometro
pressione
Ingranaggio
All'ugello
INSTALLAZIONE
Ritorno BITUBO
Ritorno
chiuso
EN