How To Use; (Iv) Salad Drainer - Panasonic MK-F500W Instrucciones De Funcionamiento

FOOD PROCESSOR
Ingredient Preparations for Salad Drainer
Function Ingredient
Lettuce
Leaves
Drainer
Cabbage
How to Use: Salad Drainer
1



After inserting the Salad Drainer into the Bowl, insert
the ingredients into the Salad Drainer. Place the Drainer
Cover on top of the Salad Drainer until the mark aligns
as shown in A. Turn the Drainer Cover anticlockwise
until the mark aligns as shown in B.
3

Plug-in the plug into the socket and turn the Rotary
Switch to select the speed required.
Note:
• Maximum working capacity of the Salad Drainer: 200 g or tilll maximum height of Salad Drainer, whichever
comes first.
• Prohibited ingredients: refer to page GB6.
• Ensure that the ingredients are spread evenly around the Salad Drainer before processing.
• Always ensure that the Drainer Cover is attached onto the Salad Drainer before operation, otherwise the
ingredients might come out and tear around the Bowl.
• Depending on the speed and amount of ingredients used, there will be significant vibrations present. In that
case, hold down on the Bowl Lid to support it during its operation.
GB16
100_160419_MK-F500_Second_EU(UZ50G155).indb
-SALAD DRAINER-
Max
Speed Operating Time (approx.)
Single Use
100 g 20 ~ 40 sec
1
200 g 20 ~ 50 sec
A
B
PP

16
Preparation Method
Cut into 3 ~ 5 cm slices.
Shredded into 1 ~ 3 mm.
2


Place the Bowl Lid on top of the Bowl and turn it
clockwise until a 'click' sound is heard. Attach the Bowl
assembly onto the Motor Housing as seen in page GB11.
Note:
Ensure that the Drive Shaft is protruding from the
Salad Drainer after insertion.
4

After the processing is completed, return the Rotary
Switch to OFF position "0" and unplug from the socket.
Remove the Salad Drainer from the Bowl.


2016/04/19 16:58:38