Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
The NEO Passive/Pasivas is rated to IP54 which means there is
protection.
The NEO Passive/Pasivas is designed for both indoor and outdoor operation where it is protected
from direct exposure to water (e.g. under a canopy). The use of protection from water and
humidity for the connection terminals is highly recommended (e.g. sealant/mastic).
Plastic Wall-mount bracket (NEO 4, NEO 5, NEO 6, NEO 8)
1
2
42 mm
figure 1
Mount (3), (4) & (5) as shown in figure 2. Screw the threaded ball (4)
into the threaded insert on the rear of the loudspeaker (6) (loudspeaker not shown below).
Tighten M10 nut (5) against the loudspeaker with a spanner.
The assembly will now be as shown in figure 3.
IP54 weather proof rating
1
Rear wall mounting part
2
Allen Screw 45 mm x M6
3
M6 nut
4
Threaded Ball
5
M10 nut
6
Rear threaded insert
7
Screw eyelet for safety cable
Mounting Process
Use the wall mounting part (1) to mark the fixing points
on the wall. Take into account the dimensions between
holes and the diameters marked in figure 1.
Drill wall and insert wall fixings. Screw wall mounting part to wall.
Ensure that suitable screws and wall fixings are used.
If in any doubt contact a suitably qualified expert.
figure 2
3
limited dust and water
(a)
(a) (b)
(a) Mounted to loudspeaker
User Manual/Manual de Uso
ingress
3
4
6
7
figure 3
NEO Passive/Pasivas
5
8
Publicidad
Tabla de contenido
