Machine Controls And Features - Clarke 00310S Operator's Manual

Machine Controls and Features

Recovery Tank Float
The FOCUS Rider Scrubber is equipped with a fl oat that shuts the vacuum off
when the recovery tank is full. The squeegee will no longer pick up water. If
this should happen, raise the squeegee and empty the recovery tank.
The Traverse
The FOCUS Rider Scrubber is equipped with an electronically controlled
traverse system with variable speeds in forward and reverse.
1. To traverse the machine, the power to the machine must be turned on
with the key switch and the operator must be properly seated.
2. The traverse speed can be adjusted by varying the pressure on the foot
pedal.
NOTE: During reverse motion, the squeegee raises and the solution fl ow
stops automatically. Reverse also reduces maximum traverse speed.
Brakes
The machine is equipped with an electronic braking system. The electronic
braking is activated automatically. NOTE: During training, you should allow
machine to come to a full stop until you become familiar with stopping distances
required.
Parking Brake
The parking brake is activated automatically when the machine comes to a
stop. It disengages automatically when you begin to traverse. The transaxle is
equipped with a manual brake release. NOTE: Machine will not function when
manual brake release is engaged. See fi gure 2.
Reverse Alarm
The reverse alarm will sound intermittently and automatically when the machine
is in reverse.
Clarke ® Operator's Manual (EN) - Focus Rider
ENGLISH
EN
Figure 2
Form No. 71171A - 9 -