Construction And Function; Combination Possibilities; Intended Use - Ottobock 1C60 Triton Instrucciones De Uso

1.1 Construction and Function

The 1C60 Triton, 1C63 Triton Low Profile and 1C64 Triton Heavy Duty pros­
thetic feet are suitable for fast walking on a variety of surfaces.
The functional properties of the prosthetic feet are achieved through the car­
bon spring elements. The prosthetic feet permit perceptible plantar flexion at
heel strike and a natural rollover movement. Stored energy is released by the
spring elements.

1.2 Combination possibilities

This prosthetic component is compatible with Ottobock's system of modular
connectors. Functionality with components of other manufacturers that have
compatible modular connectors has not been tested.
Limited combination options for Ottobock components
Combination with mechatronic prosthetic knee joints
For spring stiffness 4 from
size 29
For spring stiffness 5 from
size 25

2 Intended use

2.1 Indications for use
The product is intended exclusively for lower limb exoprosthetic fittings.
2.2 Area of application
Our components perform optimally when paired with appropriate compon­
ents based upon weight and mobility grades identifiable by our MOBIS clas­
sification information and which have appropriate modular connectors.
The product is recommended for mobility grade 3 (unrestricted
outdoor walker) and mobility grade 4 (unrestricted outdoor walk­
m°
kg
er with particularly high demands).
1C60
Size [cm]
Max. body weight [kg], mobility grade 3
Max. body weight [kg], mobility grade 4
1C63, 1C64
Size [cm]
Max. body weight [kg], mobility grade 3 and 4
14
Contact Ottobock Customer Service before making a
combination with a mechatronic prosthetic knee joint.
21 to 24
100 (220 lbs)
100 (220 lbs)
21 to 24
100 (220 lbs)
25 to 30
150 (330 lbs)
125 (275 lbs)
25 to 30
150 (330 lbs)