Buttonhole Making - Singer CE-200 Manual De Instrucciones

BUTTONHOLE MAKING

USING BUTTONHOLE FOOT
1. Insert a button in between tab A and tab B.
2. Buttonholes can be sewn to match the size of the button.
PROCEDURE
* Use an interfacing in the area of the garment where
buttonholes are placed. Stabilizer or regular interfacing can
be used.
* Make a practice buttonhole on a scrap of the fabric you are
using. Then try the buttonhole with the selected button.
1. Select one of buttonhole patterns 85, 86, 87 and 88.
2. Replace the presser foot with the buttonhole foot. (Refer to
"Changing presser foot" on page 32 - 33.)
3. Insert the button into the buttonhole foot. (Refer to "Using
buttonhole foot" above.)
4. Set the buttonhole lever (C) so that it drops down vertically
between the stoppers (A) and (B).
58
Tab A
Butée A
Lengüeta A
(C)
(A)
(C)
Tab B
Butée B
Lengüeta B
(B)
Buttonhole foot
Pied boutonnière
Prensatelas de ojales
(C)
(C)