Corded Buttonholes; Bartacking - Singer CE-200 Manual De Instrucciones

CORDED BUTTONHOLES

Hook filler cord (crochet thread or buttonhole twist) over the spur
and pull both ends of the cord forward under the foot.
Sew buttonhole so that zigzag stitches cover the cord.
When completed, release the cord from foot and snip off extra
length.
BAR-TACKING
1. Adjust the position of tab of buttonhole foot aligning with
length of bar-tack as illustrated.
2. Attach the buttonhole foot.
3. Set the buttonhole lever (C) so that it drops down vertically
between the stoppers (A) and (B).
4. Align the start position on the fabric with the mark on the
buttonhole foot and then lower the buttonhole foot.
5. While holding the top thread, start the machine.
62
89
Spur
Saliente
Tige
1
Tab A
Butées A
Lengüeta A
2
3
(C)
(A)
4
Start position Mark
Position de début Marque
Posición de inicio Marca
1 2
5
length of bar-tack
Longueur du point d'arrêt
largo de remate
Buttonhole foot
Pied boutonnière
(B)
Prensatelas de ojales
3 4 5