Assembly Of Counter Balance - ESAB Origo Mig 410 Instrucciones De Uso

US
DURING TRANSPORT, THE REAR WHEELS OF THE POWER SOURCE ARE IN THEIR
FORWARD POSITION. BEFORE USE, PLACE THE WHEELS IN THEIR REAR
POSITION.
5.3

Assembly of counter balance

Assemble the stabiliser + CB KIT if the counter balance is to be installed on the power
source. The stabiliser + CB KIT is an accessory. The order number can be found on
page 55.
Attention! Using the counter balance without stabiliser may cause the power source
to tip over.
ba58ae
- 11 -
© ESAB AB 2011