Heating Water - Silvercrest SWKD 3000 A1 Instrucciones De Uso

Hervidor de agua
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Heating water

Danger
NEVER place the electrical base
water – a potentially fatal risk!
Note
Always use freshly drawn water. Do not consume
any water that has already stood in the kettle for
longer than one hour. Do not reboil water that has
cooled down. Always pour old water away.
Microbes could have formed in it!
Note
When possible, heat only as much water as you
actually need. This also saves energy!
• Lift the kettle off of the base when filling it!
• Open the lid by pressing the lid switch under the
t
handle of the lid
Pull the lid back slightly so that it is secure and
does not drop down.
• When filling it, hold the kettle upright . Only in
this way can you correctly read the markings.
Fill the kettle...
– at least to the MIN mark, so that the appliance
does not overheat,
– no more than to the MAX mark, so that no boiling
water spills out.
• First close the lid, ensuring that it engages...
• and then place the kettle on the base
that it is standing absolutely upright on the base
y
.
• Insert the plug into a mains power socket.
y
adjacent to
, thereby opening the lid up.
y
, such
You can now heat the water up:
• Set the desired temperature:
press the button SET TEMP
q
the LED
at the desired temperature glows.
You can choose between 40°C, 60°C, 80°C
and 100°C.
• When you selected the desired temperature,
press the On/Off button
conds. The LED
blinks. The LED integrated in the On/Off button
glows. If you do not start the boiling process wit-
hin 10 seconds the set temperature lapses.
• Once the desired temperature has been reached,
a signal tone sounds, the respective LED
the temperature reached is lit constantly for
about 2 minutes and the LED integrated in the
On/Off switch
Information
If you want to bring water to a boil (100°C), you
only need to press the On/Off button
kettle will bring the water to a boil.
Information
- You can cancel the heating up of the water at
any time by pressing the On/Off button
- Once you lift the kettle from the base
appliance switches all functions off. All settings are
cancelled.
Note
Do not let the water stand in the kettle for longer
than is absolutely necessary. That would lead to
scale deposits. Pour away the water that is no lon-
ger required immediately.
- 28 -
r
repeatedly until
e
within about 10 se-
q
of the selected temperature
e
extinguishes.
e
y
e
q
for
. The
e
.
, the

Publicidad

Tabla de contenido
loading

Tabla de contenido