ADURO Prisma Instrucciones De Montaje página 4

Congratulations on your new Aduro Prisma Base for your
Aduro Prisma Pizza Oven!
Aduro Prisma Base is designed by the award-winning Danish designer Torben Madsen. To ensure good
working conditions when the pizzas are baking, Torben Madsen has designed Aduro Prisma Base which lifts
up the pizza oven from the ground. At the same time, it's possible to store firewood underneath the oven in a
decorative way.
The Aduro Prisma Base, black, comes as a standard with a semi-corrosion resistant paint. During assembly,
transportation, or regular use, the paint could get lightly scratched or damaged. For this reason, we supply a
repair spray that can be used to restore the paint on the base. Apply a thin layer of paint by spraying directly
on a clean and dry surface. The heat from the combustion will activate the paint, making it harder and more
resistant to scratches or damage.
If paint is applied excessively some bubbles may form under the surface of the
base. Do not use the repair spray in presence of open flames.
'
Warranty
According to the purchasing law, the warranty is valid for two years from the day of purchase of the Aduro
Prisma Base. The receipt is your proof of purchase. The warranty does not cover damages caused by wrong
installation or wrong use of the base nor damage to the paint.
Specifications
Material: Black quality steel
Measurements (HxWxD): 59,3 x 71,3 x 71,3 cm
Weight: 23 kg
UK
4