AUDIOropa xepton Serie Instrucciones De Servicio página 20

2.4 ID selection
Within a group, each TRX-1 needs to have a diffe-
rent ID from »00« to »99«. Every group must have
a TRX-1 set to the master-ID »00«, which defines
it as the master transmitter of the group. In this
case, »MASTER« and »TALK« are indicated on
the display. To set the ID, continue as follows:
On the powered-up device, press and hold the
MODE-button for 3 seconds. The symbol »GRP«
on the display will blink.
Press the MODE-button again. The symbol »ID«
will start to blink. By using the »+« and »-« buttons,
select an ID from 00 to 99, while taking care that
each device within the group has its own number.
After the selection, wait for 3 seconds to set the
selected ID number.
English 20