Introduction; Installation - audiophony GOA4D Manual De Instrucciones

2. INTRODUCTION

®
Congratulations for acquiring a genuine, professional AUDIOPHONY device!
The GOA4D is a professional DJ audio mixer designed and manufactured with great attention and will to
perfection. It is suited for all types of DJ thanks to its wide variety of functions, which make it able to mix any
musical style: techno, house, minimal, electro, hip hop...
The GOA4D is a mixer thought for scratching techniques, due to the versatility of the adjustments of faders and
crossfaders. The GOA4D is furthermore able to wear the ETERNAL, magnetic crossfader with 5 years guarantee,
which has been specially designed for scratching specialists.
This unique mixer uses the best components available on the market for the highest quality sound and a great
comfort of use. Thanks to our many years of experience in professional audio equipment design, circuits are
extremely efficient and achieve a warm and crystal clear analogue sound.
Furthermore, the GOA4D is a mixer which has been specially designed for all kinds of professional installations,
thanks to its two balanced outputs and its two microphone inputs. Its design and resistance turn it into the ideal
console for professional installations, as well as for mobile applications executed by trendiest DJ's.

3. INSTALLATION

The main consideration to be taken when looking for the best setup location for the GOA4D has to be the
maximum commodity for the user and the easiness for realizing the necessary connections.
The GOA4D has been basically designed as an on desk mixer and its usual
location will be between two turntables or CD players. The mixer is 37 cm
(14.57") deep and 32 cm (12.6") wide.
Using the metallic side panel kit GOA4DBATTLE (optionally available) you may
fix your GOA4D directly on a support surface or on those side panels which also
allow you to skew it. The "GOA4DRACK19" metallic holders allow you to install
the mixer in a standard 19" rack.
Because of the high gain of the PHONO and MICRO inputs, always try to place
the mixer as far away as possible from noise sources (dimmers, engines, etc.) and mains wires. For the very same
reason, and under any circumstance, you should never remove the unit's metallic cover.
The power consumption of the GOA4D is very low, so they do not need any cooling, but you should avoid extreme
temperatures and the atmosphere should be as dry and dust free as possible.
The GOA4D operates now with a new universal input power supply "Switching Power Supply" and can perfectly
works without any internal modification from 90V to 264V – 47 to 63Hz. Make sure that the mains-wire is far away
from the signal-cables in order to avoid any possible audio hum.
In order to protect the unit from an eventual electrical overload it carries a T 0.5A fuse. Should it ever blow up,
unplug the unit from mains and replace it with an identical one. If the new fuse blows again contact immediately
with our authorized technical service.
ATTENTION: NEVER SHORT-CIRCUIT THE SECURITY PATH NOR USE A HIGHER VALUE FUSE.
CAUTION: Fuse substitutions have to be performed by a qualified technician.
5