Cleaning The Guide Rail; Storage; Transport - AL-KO Easy Flex CSA 2020 Manual De Instrucciones

GB
For the inexperienced user: Have the saw chain
sharpened by a specialist/customer service. If
you are sharpening the saw chain yourself, heed
the following values. Accessories can be ob-
tained from specialist retailers.
Chain type File diameter
Oregon 91P033X
NOTE
Only remove a little material when sharp-
ening!
We recommend using a chain sharpen-
ing tool for sharpening your saw chain.
8.3.4

Cleaning the guide rail

1. Clean the guide rail, the groove of the guide
rail and the oil outlet openings regularly.
2. Use a flat file to remove the burrs that have
built up on the guide rail due to the saw
chain.

9 STORAGE

Thoroughly clean the appliance after each use
and – if present – attach all covers. Store the ap-
pliance in a dry, lockable place out of the reach of
children.
Carry out the following jobs before intervals in
work lasting for longer than 30 days:
1. Empty the oil tank for the saw chain oil.
40
Top plate an-
gle
Rotational an-
gle of the tool
5/32" 30°
Depth gauge setting
Down angle Head tilt angle
(55°)
Inclination an- Side plate angle
gle of the tool
0°
2. Remove the saw chain and guide rail, clean it
and spray it with rust-proofing oil.
3. Thoroughly clean the appliance and store it in
a dry place.
IMPORTANT!
Danger of damage to the appliance
Dried-on/sticky saw chain oil can lead to
damage to oil-channelling components
after lengthy storage.
■
Remove the saw chain oil from the
appliance before an extended period
of storage.

10 TRANSPORT

Before transporting, carry out the following mea-
sures:
1. Switch off the appliance.
2. Remove the rechargeable battery from the
appliance.
3. Pack the battery properly.
Storage
Depth
gauge set-
ting
80° 0.025"
File
CSA 2020