Quick Menu; Switching The On-Board Computer On/Off; Battery Charge Indicator - Bosch BOI330 Instrucciones De Servicio

You can use the – (11) and + (12) buttons to select
the setting you want. You can open the settings, as
well as any additional sub-menus, using the select
button (9). You can use the < button (10) to go back
to the previous menu from any settings menu.
You can find the following superordinate sections on
the first navigation level:
– <Registration>
Information about how to register later on
– <My eBike> – Settings surrounding your eBike
You can reset the counters (such as the number of
kilometres travelled that day or average values) to
zero either automatically or manually, and you can
reset the range. You can change the wheel circum-
ference value that was preset by the manufacturer
by ± 5%. If your eBike features eShift, you can also
configure your eShift system here. The bicycle man-
ufacturer or dealer may base the service date on the
distance travelled and/or a period of time. The due
date for the service is displayed under <Next Ser-
vice: [DD. Mon.YYYY] or at [xxxxx] [km]>. The
bike component page displays the serial number
and hardware and software versions for each com-
ponent in addition to other key data which is rele-
vant for the components.
– <My profile> – Active user data
– <Bluetooth [current setting]> – Switching the
®
Bluetooth function on or off
Connected devices are displayed.
– <Sys settings> – A list of options for setting your
on-board computer.
You can display the speed and distance in kilome-
tres or miles, display the clock in 12- or 24-hour
format, adjust the time, date and time zone and se-
lect your preferred language. You can reset the Kiox
to its factory settings, run a software update (if
available) and choose between a black or white de-
sign.
– <Information> – Information about your Kiox
Information on FAQ (frequently asked questions),
Bosch eBike Systems
certification, contact information, information on li-
censes.
You can find a detailed description of each parameter
in the online operating instructions at
www.Bosch-eBike.com/Kiox-manual.

Quick menu

Selected settings are displayed on the quick menu.
These settings can also be changed while riding.
You can access the quick menu via the select button
(9). It cannot be accessed from the status page.
The following settings can be changed via the quick
menu:
– <Res. trp data Last (Reset trip data Last:
[DD.Mon.YYYY HH:MM])>
All data on the journey so far is reset to zero.
– <eShift>
You can use this to adjust the cadence or the start-
ing gear, for example. The starting gear can be ad-
justed in the settings under <My eBike> →
<eShift>.

Switching the on-board computer on/off

To switch on the on-board computer, briefly press
the on/off button (4).
To switch off the on-board computer, press and hold
the on/off button (4) for more than one second.

Battery charge indicator

The battery charge indicator of the eBike battery d
can be read on the status page and the status bar.
The eBike battery's state of charge is also indicated
by the LEDs on the eBike battery itself.
Colour of Explanation
the indica-
tor d
White The eBike battery is over 20% charged.
Yellow The eBike battery is over 5% charged.
Red The capacity for assisting the drive has
been used up, and assistance is
switched off. The remaining capacity
English – ​ 9
1 270 U20 XBK | (21.06.2018)