Fein WPO14-15E Instrucciones De Uso página 10

3 41 01 130 21 0.book Seite 10 Freitag, 18. Dezember 2009 7:47 07
en
10
Intended use of the power tool.
hand-guided polisher for dry polishing, sand-
ing with sanding discs and brushing surfaces of
metal, stone, plastic, wood, composite mate-
rials, paint/varnish, filler and similar materials
in weather-protected environments using the
application tools and accessories recom-
mended by FEIN.
Operation of the power tool off power generators.
This machine is also intended to be pow-
ered by a. c. generators with sufficient
power output that correspond with
ISO 8528, design class G2. Compliance with
this Standard in particular is not given when
the so-called distortion factor exceeds 10%.
When in doubt, inform yourself about the
generator in use.
Symbols.
Symbol Explanation
Action to be taken by the user
General prohibition sign. This action is forbidden!
Do not touch the rotating grinding wheels.
Follow the instructions in the adjacent text or graphic!
Be absolutely sure to read the enclosed documentation such as the
Instruction Manual and the General Safety Instructions.
Before commencing this working step, pull the mains plug out of the
socket. Otherwise there will be danger of injury if the power tool
should start unintentionally.
Use eye-protection during operation.
Use ear protection during operation.
Use protective gloves during operation.
An exposed surface is very hot if touched and therefore dangerous.
This symbol confirms the certification of this product for the USA and
Canada.
This sign warns of a directly imminent, dangerous situation. A false reac-
DANGER
tion can cause a severe or fatal injury.
Operating the power tool off
WARNING
power generators whose no-
load voltage exceeds the voltage value on the
type plate of the power tool is prohibited.