TECshow DMC-2000 Manual De Usuario página 9

Mixer Selection
1. Both level control
Adjust the level of audio signals output the (BOOTH) terminal.
2. CUE/PGM control
Adjust the balance of the monitor volume between the sound
of the channels for which the headphones (CUE) button is
pressed and the sound of the master channel.
3. CUE level control
Adjust the level of audio signals output headphone.
4. Master level control
Adjust the master sound level output.
5. Master level indicator
Display the master output's audio level.
6. GAIN control
Adjust the individual channel output gain.
DMC-2000
ENGLISH VERSION
7. EQ (HI,MID,LOW) control
These adjust the sound quality input the various decks
8. FILTER control
The original sound is output when the control is at the
center position.
Turn counter-clockwise: Gradually decreases the low-pass
9. CUE (Headphones cue button)
Use to monitor the sound of the respective deck over the
headphones.
10. Channel fader
Adjust the level of audio signals output in each channel.
11. X-FADER
sides of the crossfader for output.
-
p. 9