Sears Kenmore 2800 010 Serie Manual De Uso página 11

Wash Temp Suggested Fabrics
Hot
_iSome cold water is added to save Whites and pastels
energy. This may be cooler than Durable garments
ii
Warm
Some cold water may be added, Bright colors
so this will be cooler than what Moderate to Hght soils
your previous washer provided.
Coot - brlghts/darks
Warm water is added to assist Colors that bleed
ii in soil removal and to help or fade
dissolve detergents. Light soils
cold
ii
Warm water may be added to ::i Dark colors that bleed
ii
assist in soil removal and to help or fade
dissolve detergents. Light soils
Tap Cold
This is the temperature from Dark colors that
your faucet, bleed or fade
Light soils
11. Select cycle options
12. Select Start/Pause/Unlock Lid
to begin wash cycle
Press the START/PAUSE/UNLOCK LID button to start the wash
cycle. Filling is delayed for several minutes while load balance
is sensed. When the cycle has finished, the Cycle Complete
indicator wiii light and the end of cycle signal will sound (if
set). Promptly remove garments after cycle has completed
to avoid odor, reduce wrinkling, and rusting of metal hooks,
zippers, and snaps.
Unlocklng the lld to add garments
If you need to open the lid to add ] or 2 missed garments, you
may do so during the first portion of the Sensing step. Press
START/PAUSE/UNLOCK LID; the lid will unlock once the
washer movement has stopped. This may take several minutes
if the load was spinning at high speed. Then close lid and press
START/PAUSE/UNLOCK LID again to restart the cycle, if lid is
left open for more than 10 minutes, the water win pump out.
Delay
in water flll
Filling is delayed for 2 to 3 minutes to check for load
unbalance. You will hear the hum of the spin prior to filling.
This is normal operation.
Select any other cycle options you may wish to add, if not
previously set. Some cycles wiil automatically add certain
options such as Prewash or 2nd Rinse. These can be turned
off:, if desired.
NOTE: Not all options are available with all cycles.
11