Positioning Of The Sensor In Motors Of Line W40 - WEG Motor Scan Manual General De Instalación Y Operación

7.5.2.Positioning of the sensor in motors of line W40

The sensor can be installed on W40 motors following the positions indicated on the figure 7.4 (for frames IEC
160 to 280, choose one of the positions indicated on the figure 7.5):
1
Detale / Detail X
Escala / Scale 1 : 1
To do the correct installation, must follow the recommendations shown in figure 7.6 below.
ela Geral / General Table
W22
CAÇA
AME
M(mm) M(Pol)
25
25 0.984
50
80 28 1.102
15 38 1.496
55 48 1.889
2 3
Frames IEC160 to 280
X
Y
Figure 7.5 - Site for fixation of the WEG Motor Scan for W40 motors
∅8,5mm
∅0.334''
+
Figure 7.6 – Detail of the drilling for mounting the WEG Motor Scan on the W40 motor
4
2
8,5mm (+2) / 0.334 (+0.078)
0.078
12.5
For the vertical direction
Detalhe / Detail Z
the positioning is free
Escala / Scale 1 : 2
Demonstrativo de posicionamento do sensor no motor em campo
MASSA BRUTA/GROSS WEIGHT
ECM LOC
Stoinski
EXEC
VERIF/CHECKED
LIBER/RELEASED
29/03/2018
DT LIBER/REL DT
Propriedade da WEG. Proibida reprodução sem autorização prévia./ WEG's property. Forbidden reproduction without previous authorization.
5
Carcaças com extração quadripartidas (Lisas), adotar posicionamento centralizado.
Frames IEC 280 and above
Housing with four-quarters extraction (smooth), adopt centralized positioning.
Vista / View Y
Vista superior / Upper view
22mm (+2) / 0.866 (+0.078)
Vista / View Y
15
Demonstration of positioning of the sensor in the field motor
MASSA LÍQUIDA/NET WEIGHT
RESUMO DE MODIFICAÇÕES
SUMMARY OF MODIFICATIONS
POSICIONAMENTO DO SENDOR MOTOR SCAN
Allowable lateral
displacement for sensor
fixing drilling
Manual of Electric Motors
www.weg.net
6
15
ESCALA/SCALE 1:4
EXECUTADO VERIFICADO LIBERADO
DATA
EXECUTED CHECKED RELEASED DATE
1 1
FOL/SHEET
57
VER