ZEKLER 412 RDB Instrucciones De Uso página 11

Exchange the batteries
The headset can run on both rechargeable and disposable batteries of AA type (LR6/HR6). Make sure you
only use specified battery types. Warning! If other battery types than specified are used, risk of explosion
may occur. Dispose used batteries according to local regulations.
Unscrew the battery lid. (A:16). Check that the batteries + and - poles are placed correctly in the battery
compartment.
Never connect a charger to the headset if disposable batteries are used.
Charging of batteries
Prior to charging, make sure all functions are switched off.
Check that the charger is correctly connected to the headset charging socket (A:18) and the power source
and make sure specified batteries are used and placed with the + and - poles correctly in the battery
compartment. When charging, the headset LED light will flash red.
Use only by the manufacturer specified and approved charger (B:4)
When the batteries are charged the LED will light up solid red. A full charge will take approximatly 3 hours
(longer if charged from a USB socket).
Important! Do not use the headset when the batteries are charging!
The battery run time is approximately: Bluetooth® streaming and Level Dependent: 62 hours, FM radio and
Level Dependent: 56 hours. The operation time may vary depending on the environment, temperature, and
battery.
Recommendations for maximum lifespan of rechargeable batteries
• New rechargeable batteries should be fully charged before first use.
• Remove batteries if not in use for a long period.
Components (pic. A)
A:1. Headband of thermo plastic
A:2. Stirrup attachment with firm and easy size adjustment
A:3. Replaceable foam filled ear cushions
A:4. FM radio aerial with excellent reception sensitivity
A:5. Level Dependent "Active Listening" microphones
A:6. Connection cable between left and right ear cups
A:7. Noise suppressed boom microphone
A:8. Replaceable foam filled head cushion
A:9. Helmet/Cap attachment of thermo plastic, 30 mm standard
A:10. On/Off-Volume knob for FM radio
A:11. Knob for radio station selection
A:12. On/Off-Volume knob for Level Dependent function
A:13. 3,5 mm input for connection to external sound sources
A:14. Bluetooth® multi-function knob
A:15. Bluetooth® LED light
A:16. Battery lid (easy to open without using tools)
A:17. Socket for boom microphone
A:18. Charging socket
Accessories and spare parts
B:1. Hygiene kit HK3B: 380684118
B:2. Sweat absorbers CR1: 380684035
B:3. Windshield boom microphone: 380684084
B:4. Battery charger: 380684100
B:5. Rechargeable AA batteries: 380684068
B:6. 3,5 mm stereo connection cable: 380684043
B:7. Boom microphone: 380684076
B:8. Windshield level dependent microphones: 380684092
11