Cleaning And Caring For The Inverter - Dometic SINEPOWER DSP 612 Instrucciones De Montaje

Cleaning and caring for the inverter

9.4 Configuring the net configuration
D
DANGER!
Changing the net configuration results in risk of lethal injury.
The dip switch must only be set by qualified personnel.
Remove the the dip switch's protection cap for configuring only. Insert
the protection cap to prevent switching the dip switch's setting.
Using the dip switch you can define in which net configuration the inverter shall
operate.
Parameter
An external downstream circuit breaker (RCD) is
necessary.
Operation with one load only or installation of an
external insulation monitor.
National standards shall apply!
10 Cleaning and caring for the inverter
A
NOTICE!
Do not use sharp or hard objects or cleaning agents for cleaning as these
may damage the product.
➤ Occasionally clean the product with a damp cloth.
16
TN grid
IT grid
SinePower
Dip switch
On
Off
EN