Minimum System Requirements - Dometic MASTERFLUSH MF 7100 Instrucciones De Montaje

Specifications
Dometic fl ush switch panel
Ref. Dimension
A 3.25 in. / 83 mm
B 1.625 in. / 41 mm
4.2 Materials
Toilet: vitreous ceramic
Toilet base: polypropylene
Dometic fl ush switch panel: polystyrene (DFS-1F or DFS-2F);
or powder-coated aluminum (DFST)
4.3

Minimum System Requirements

Power draw
Circuit breaker
Electrical
Fitting size
Water
Supply hose ID
Supply
Flow rate
Inside diameter
Discharge Horizontal run*
Vertical run*
* Horizontal and vertical run distances are not cumulative. Check for adequate discharge fl ow
if installation nears one of these limits.
Specifi cations are subject to change without notice.
4
(fi g.
Wiring
0.75 in./19 mm ID – sea water fl ush toilet
2.0 gpm/7.6 lpm minimum – fresh water fl ush
)
20 amps/12 V DC; 10 amps/24 V DC
25 amps/12 V DC; 15 amps/24 V DC
12 ga. (up to 25 ft./7.6 m total circuit)
Consult ABYC guidelines for additional information.
0.5 in. NPT – fresh water fl ush toilet
1.5 in./38 mm or 1 in./25 mm
40 ft./12.2 m maximum
4 ft./1.2 m maximum
Dometic MasterFlush
7