Perel LEDA4011RGB Manual Del Usuario página 5

4. Features
 floodlight for commercial or residential use
 die-cast aluminium housing with tempered glass
 ribbed for maximum heat dissipation
 suited for outdoor use (IP65)
 comes with 30 cm unterminated cable and adjustable bracket
5. Installation
Guidelines
 A qualified technician should install and service this device.
 The construction to which the device is attached should be able to
support 4 times the weight of the device for one hour without
deformation.
 Never stand directly below the device when it is being mounted,
removed or serviced. Have a qualified technician check the device once
a year and once before you bring it into service.
 Overhead mounting requires extensive experience: calculating workload
limits, determining the installation material to be used... Have the
material and the device itself checked regularly. Do not attempt to
install the device yourself if you lack these qualifications as improper
installation may result in serious injuries.
 This device is not suitable for dimming.
Distances
 Keep at least 50 cm distance at the top and bottom, and 30 cm on
either side.
 Respect a minimum distance of 0.5 m between the device's light output
and any illuminated surface.
V. 03 – 18/09/2017
LEDA4011RGB/LEDA4012RGB
5 ©Velleman nv