Bresser NATIONAL GEOGRAPHIC 90-55000 Instrucciones De Uso página 14

2. USB charge:
When charging via the supplied cable, the indica-
tor LED (8) will fl ash red to confi rm the internal
battery is charging. When the internal battery
is fully charged, the indicator LED (8) will stop
fl ashing red and all four indicator LEDs will turn
red.
3. Charging portable devices:
To charge your portable digital device, connect
the device via the connector. Before charging
your mobile phone, you can choose 500mA or
1A by pressing the power switch (6). If there is
no output from the charger for 30 seconds, the
charger will automatically shut down, and the
green LED indicator turn off.
When charging the device, one of the indicator
LEDs (3 or 4) will fl ash green. When charging is
complete, remove the cable from the device and
the charger. The indicator LED will turn off.
4. Battery indicator:
Press the energy test button (6) to check the sta-
tus of the built-in battery. The built-in battery is full
when all red LED indicators are illuminated. Two
red LEDs mean the device is half charged, and
one LED means the device is only one-quarter
charged.
5. Output current adjust function:
Pressing the power switch (6) can adjust the
output current of the solar charger. One press
selects 500mA (green LED (3) indicator), and
a second press selects 1A (green LED (4)
indicator). 500mA is common for regular mobile
14