Main Unit - Bresser TemeoTrend P Instrucciones De Uso

9. Now replace the battery compartment of the remote
sensor (Fig. 2, 23).
Note: Main unit can operate with up to 3 connected
remote sensor and show their data on the display.
Position the main unit and the remote sensor within the
effective transmission range, 50 meters under usual
circumstances. In some cases signal transmission may be
disturbed. Then remove batteries from the main unit and
the remote sensor and start procedure again as described
above.
FuNcTIONS

Main unit

LcD display (Fig. 1, 1)
Displaying current time, alarm time/date, indoor and
outdoor temperature as well as weather forecast.
SNOOZE/LIGHT button (Fig. 1, 5)
Press it to turn on the backlight and projector. When the
alarm is sounding, press it to stop the current alarm and
activate snooze.
cLOcK SET button (Fig. 1, 9)
Press it to switch between Alarm1, Alarm2 and Date
mode. Press and hold it for approx. 2 seconds to enter
time setting mode. In time setting mode, press it to move
the setting item. In setting mode press and hold it for
approx. 2 seconds to save and exit the setting.
DE
GB
FR
NL
ES
IT
25