Before First Use; Filling The Water Tank - Singer Expert Finish Manual De Instrucciones

OPERATING INSTRucTIONS

Before First Use

• remove any protective films or stickers from the soleplate and the iron.
• read all safety and operating instructions.
• Fill the water tank as described in "how to Fill Water".
• plug the iron into a grounded electrical outlet.
• The LCD Display will show all symbols and then turn off with an audible beep
sound.
• press the Temperature Up/ON-OFF button. The LCD Display will indicate the
setting number, fabric type and temperature bars.
• Select the maximum temperature by pressing the Temperature Up button
until the display indicates level 9.
• When the selected temperature is reached, the LCD Display will stop flashing
and an audible beep will sound. The iron is ready to use.
• move the variable Steam Control Dial to the maximum position
• On an ironing board or protected surface, iron an old towel or other heavy
material until the water tank is empty and no more steam is produced.
• It is normal for a small amount of smoke and a light odor to be produced the
first time the iron is used. This will disappear quickly.
• particles may emit from the iron the first time it is used. They are not harmful
and should disappear after the iron has been used as described above.
• Consult the garment's label for temperature instructions or use the chart on
page 6 of this manual for recommendations.
4

Filling the Water Tank

• Ensure iron is unplugged.
• move the variable Steam Control Dial to
• Open the Water Inlet Cover and tilt the iron slightly forward, resting on its
heel.
• Using the filling cup provided, fill the water chamber to the mAX mark.
• Close the Water Inlet Cover.
• To refill the water tank during ironing, always unplug the iron. When you
return to ironing, make sure the iron reheats to the desired level and the LCD
Display stops flashing before continuing.
Water Recommendations
.
• Singer home Essentials irons are designed to be used with regular tap water.
• If your water is especially hard or if you use a water softener, try using
inexpensive bottled spring water.
• Never use water with additives, including scents, starches, or fabric
conditioners, as they can cause deposits to form in the iron that can stain
clothing.
position.
WARNING: ALWAYS mAkE SUrE ThE IrON IS UNpLUggED BEFOrE FILLINg
WITh WATEr Or COmINg INTO CONTACT WITh LIQUID OF ANY kIND.
5