Final Check; Final Tasks; In Case Of Warranty - Material Return Procedure; Ordering Service And Spare Parts Order - SystemAir ROOFTAIR Serie Manual De Instalación Y De Mantenimiento

FINAL CHECK

1. All panels and fan guards are in place and secured.
2. .Unit clean and free of remainder installation material.

FINAL TASKS

Place the plugs back on the valves and check that they are properly tightened.
If needed, fix the cables and the pipes on the wall with clamping collars.
Operate the air conditioner in the presence of the user and explain all functions.
Show him how to remove, clean and place back the filters.

IN CASE OF WARRANTY - MATERIAL RETURN PROCEDURE

Material must not be returned without permission of our After Sales Department.
To return the material, contact your nearest sales office and ask for a "return voucher". The return voucher shall be sent
with the returned material and shall contain all necessary information concerning the problem encountered.
The return of the part is not an order for replacement. Therefore, a purchase order must be entered through your
nearest distributor or regional sales office. The order should include part name, part number, model number and
serial number of the unit involved.
Following our personal inspection of the returned part, and if it is determined that the failure is due to faulty material
or workmanship, and in warranty, credit will be issued on customer's purchase order. All parts shall be returned to
our factory, transportation charges prepaid.

ORDERING SERVICE AND SPARE PARTS ORDER

The part number, the order confirmation and the unit serial number indicated on the name plate must be provided
whenever service works or spare parts are ordered.
For any spare part order, indicate the date of unit installation and date of failure. Use the part number provided
by our service spare parts, if it not available, provide full description of the part required.

MAINTENANCE

The user is responsible for ensuring that it is in a proper working condition and that technical installation
as well as the regular maintenance operations are performed by properly trained technicians and in
accordance with the instructions contained in this manual.

REGULAR MAINTENANCE

These units have been designed to require only minimal servicing, thanks to the use of a maximum number of
lubricated-for-life components. Nevertheless, certain regular servicing operations are necessary to guarantee
optimal system operation.
Servicing must be performed by experienced and qualified personnel only.
WARNING : Isolate unit from main power supply before working on unit.

GENERAL INSPECTION

Carry out a visual inspection of the complete installation in service.
Check the general cleanness of the installation, and check if the condensate evacuations is not blocked, specialy
on the indoor coil, before the cooling season.
Check the condition of the condensate tray by pulling it out of the casing.
22