Sewing A Decorative Stitch - Singer 5560 Manual De Instrucciones

A decorative stitch is used for embellishing and adding flair to your sewing projects.
(Go to www.singerco.com to view other decorative stitches that can be used).
HOW TO:
1. Set the machine to the desired stitch by entering the number of the desired stitch. (See Page 19)
2. Set the Stitch Length between 0.3 and 4.5. (See Page 19)
3. Set the Stitch Width between 1.0 and 6.5.(See Page 19)
SEW ALONG: Scallop Stitch
Use a stabilizer (see Appendix) on the underside of the fabric if there is gathering or puckering as
✓
you sew. Decorative stitching can be used almost anywhere on your project!
It may be helpful to decrease the upper tension by 1 or 2 numbers when sewing decorative
✓
stitches. This will help prevent the bobbin thread from possibly showing on the top when sewing
denser stitches.
START SEWING

Sewing a Decorative Stitch

LCD Display
1. Set the stitch selection buttons to 39.
2. Set the Stitch Length to number 0.5.
3. Set the Stitch Width to 6.0.
4. Place the fabric under the All-Purpose Foot with
the right-hand edge of the fabric lined up with
the desired seam guide line on the right side of
the needle plate. Lower the presser foot, then
step on the foot control to begin sewing. Sew 2
to 3 stitches and then backstitch (See Page 20)
to reinforce the seam.
Function Buttons
21